This is the Perrin Down Pipe Install. The Perrin Down pipe was a flawless fit to the turbo housing. The O2 sensor for the Perrin Down pipe hit the fire wall just a little bit so I cut it away.
Here's the Old Stock DownPipe
here's the new Perrin Downpipe
A close up with logo
Here's the rear gasket I used since one isn't provided.
Stading up
Here you can see the Perrin DP attached to the turbo, no heat shield
Where the red arrow points, that's the heatshield, I cut the botton half off.
This is the top view of the heat shield, I cut off the bottom half to make it fit
And down the back section (click the above two for bigger ver.)



Look'n for a Custom Subwoof Box?